HS-34 High Speed Labeler
Labeling pots on the High Speed Labeling Station increases productivity and reduces production line downtime, by allowing growers to pre-label up to 6 inch, new, round and square pots prior to production. The labeler works
in three stages. In the first stage, stacked pots are laid down horizontally on the in-feed string belt conveyor. This conveyor feeds the pots to the middle belt conveyor, where in the second stage, the pots are pulled apart and passed under the tamp-blow applicator for labeling. They are then carried to the third stage, where they are gathered back into a stack on the out-feed string conveyor. One person can operate the labeler in a continuous manner, by adding or removing stacked pots as required. Rates of up to 4 pots per second are possible with the standard “apply only” applicator and one operator. In addition to the standard label applicator, a “print and apply” version is available to accommodate short runs and on-line printing, at rates of up to 1-1/2 pots per second.
Simple crank adjustments are provided to make changing pots quick and easy.

Dimensions:
  • (12'-2"L x 3'-0"W x 6'-2"H)

Electrical Requirements:
  • 220VAC, Single Phase (conveyors)
  • 110VAC (labeler)

Air Requirements:
  • 10CFM @ 90PSI

Application Speed:
  • Apply only applicator: Up to 4 pots/second
  • Print & Apply applicator: Up to 1-1/2 pots/second

Label Sizes:
  • Apply Only Applicator: Min size 0.75"W x 0.75"L; Max size 10"W x 10"L
  • Print & Apply Applicator: Min size 1.0"W x 1.0"L; Max size 5.25"W x 10"L

Options:
  • External USB CD/DVD Drive
  • Low Label Sensor
  • 3 Light Alarm Stack Assembly (Amber-Low Label, Red-Out of Labels, Green-Ready)

  • See Layout Drawing